炉前碳硅分析仪 In February 2019, the regional manager of Liaoning visited Dandong Hangxiang Casting Co., Ltd., which mainly produces gray iron, ductile iron and other products. The product quality requirements are high. Because the content of carbon and silicon in the furnace is difficult to control and the production cost is high, Product quality, reduce costs, purchased a set of carbon furnace silicon analyzer from Nanjing Kirin Instrument Group in 2018 炉前碳硅分析仪 , So far, the test is fast and stable, and the customer is very satisfied. The carbon and silicon analyzer in front of the furnace It solves the problem of quality control of hot metal in front of the furnace and truly becomes a good helper in front of the furnace of the foundry!
炉前碳硅分析仪 Since the cooperation between Hangxiang Foundry and Nanjing Kirin Instrument Group, the furnace front carbon and silicon analyzer In terms of cost control, part of the scrap steel was used instead of primary iron, which greatly saved manufacturing costs and improved the value of the product. In order to meet market demands, under the research of a professional technical team, Nanjing Kirin Group has increased software diversity, conventional carbon and silicon content determination, and nodularization rate determination after spheroidization, in response to different customer needs. Customers are very satisfied with the quality and after-sales guarantee of the "Kirin" brand during this return visit.
炉前碳硅分析仪 Nanjing Kirin TS-6 fast carbon furnace silicon analyzer Using thermal analysis method, the result can be obtained in about 90 seconds, and the batching calculation is automatically performed according to the predetermined target component and the amount of molten iron. Eight calibration lines, eight target components, and the calibration line can be set in association with the target material. In addition, this device can also quickly serve as a mechanical and physical device, which can simultaneously test the tensile strength of the casting and the nodularity of the ductile iron! Especially suitable for large-scale production of professional casting enterprises to use in front of the furnace.
Nanjing Kirin Scientific Instrument Group Co., Ltd.
March 13, 2019